4-28
Remove the separator from the unit (See
page 4-3)
Remove the 12 screws that hold the separa-
tor halves together.
1.
2.
Open the two halves to access the lower
zone temperature display thermistor.
(UW): Lift the foam insert to access the up-
per zone temperature display thermistor.
(BC): This will be the thermistor for the mid
zone on the Beverage Center.
3.
4.
DISASSEMBLE SEPARATOR (UW, BC)
Separator
Screws
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
To Next Page
Loading...
