Section 8
High Pressure Water System
20425618
5-2005/Rev 0
8-6
8.5 Service and Maintenance Overview
Never perform any type of maintenance on the high pressure water system while it is pressurized.
Always turn the main control power off and bleed the high pressure water before servicing.
Improper assembly can lead to the premature failure of components. Maintenance procedures
must be followed carefully; components must be properly cleaned prior to assembly and
tightened to the correct torque specifications.
Some high pressure components are not serviceable at the customer level, others require precise
refinishing. KMT Waterjet Systems offers maintenance and refinishing services for these
components.
NOTE
Refer to Section 11, Parts List for a complete listing of replacement parts and part
numbers.
To Next Page
Loading...
Need help?
General
