SECTION 2
INSTALLATION
Page 2-4
49831894
2.2 Installation Requirements (Utilities)
Environment: The SL-IV Waterjet Pump must be installed indoors.
Ambient conditions must not exceed maximum
specifications.
Moving: The SL-IV Waterjet Pump has provisions to be moved
with a forklift. Check weight specifications.
The waterjet pump is top heavy. Avoid situations that could
result in the equipment overturning
Electrical connections must be made by qualified
personnel, and must meet national and local electrical
codes.
2.2.1 Equipment Location/Environment
Space Requirements
: There should be a minimum of 900mm
(36 inches) clearance on all sides of the pump
to facilitate service.
Electrical Wiring: Power supplied to the pump must be in
accordance with national and local electrical
codes. See specifications or requirements.
Control Wiring: Wiring for remote control of the pump must be
in accordance with national and local
electrical codes. The SL-IV Waterjet Pump has
a 24vdc electrical control system and has
provisions for remote operation in the pump
control panel.
ARNING
!
CAUTION
!
To Next Page
Loading...
Need help?
General
