A-61837 September 2016 23
The Ready screen allows you to access the following options:
• Clear Path
• Lower Elevator
• Reset User Counter
• Show User Counter
• Smart Touch
• Operator Log
• Information
• Diagnostics
• Settings
NOTE: Use the Up/Down arrow buttons on the Operator Control Panel to
display all options.
.
Clear Path — use this option to clear the scanner transport of any documents.
Lower Elevator — use this option when you need to make additional room in
the input elevator tray for adding documents to the stack. The input elevator
will descend to the lowest position (500-sheet).
Reset User Counter — allows you to reset the value of the User counter (the
Document counter must be reset by the scanning application). This option will
not be displayed if Show User Counter is Off/Disabled.
Show User Counter — displays the User counter. Press the Select button on
the Operator Control Panel to enable or disable this option.
The other options on the Ready screen provide additional options when
selected. See the sections that follow for more information.
Indicates that the option is On/Enabled.
Indicates that the option is Off/Disabled.
Displays another screen.
To Next Page
Loading...
