34 A-61837 September 2016
Selecting a paper source The Paper Source option allows you to select the height of the input elevator.
1. Select Application Overrides from the Settings screen to access the
paper source settings.
2. Select Paper Source from the Application Overrides screen.
3. Select one of the following options:
• Document Feeder: the input elevator is in the highest position.
• 100 Sheets
• 250 Sheets
•500 Sheets
NOTE: For a description of the selections above, see the Scanning
Setup Guide for the Kodak i4x50 Scanners for TWAIN and ISIS.
4. Press the Select button, then press the Go Back (X) button to return to the
Application Overrides screen.
To Next Page
Loading...
