54 A-61837 September 2016
Vacuuming the output tray
and input elevator
1. Power down the scanner.
2. Remove the output tray.
3. Thoroughly vacuum the output tray area and the input elevator area.
Cleaning the rollers Cleaning the rollers includes all of the rollers in the transport area, the
separation roller tires and the feed module tires.
1. Power down the scanner.
2. Open the scanner cover.
3. Manually rotate and wipe the rollers with a roller cleaning pad.
NOTE: Do not use Staticide wipes or Brillianize Detailer wipes to clean
the rollers.
4. Dry the rollers with a lint-free cloth.
To Next Page
Loading...
