A-61837 September 2016 35
Setting Post Scan Rotation The Post Scan Rotation option allows you to select a rotation option to be
applied to the electronic image after is has been scanned.
1. Select Application Overrides from the Settings screen to access the post
scan rotation settings.
2. Select Post Scan Rotation from the Application Overrides screen.
3. Select one of the following options:
• (none)
• Automatic
• Automatic - default to 90
• Automatic - default 180
• Automatic - default 270
• 90, 180, 270 degrees
NOTE: For a description of the selections above, see the Scanning
Setup Guide for the Kodak i4x50 Scanners for TWAIN and ISIS.
4. Press the Select button, then press the Go Back (X) button to return to the
Application Overrides screen.
To Next Page
Loading...
