28 A-61837 September 2016
Count Only - Multifeed The Count Only - Multifeed option allows you to count documents without
scanning, however, when a multifeed is detected the scanner will stop.
1. Select Count Only - Multifeed.
The Count Only Test screen will be displayed.
2. Place the documents you want to count in the input elevator. As the
scanner is counting documents, when a multifeed is encountered, the
scanner will stop.
3. Press the Start/Pause button to resume counting. When the scanner has
fed all documents, the total number will be displayed.
4. Press Stop to return to the Diagnostics screen.
To Next Page
Loading...
