Kolver K-DUCER User Manual

Vers. 062721 61
Download from unit
To be used to recall all the settings from the control unit and display them in the K-Expand
software. The K-Ducer must first be connected and recognized using the “Scan Port”
button.
In case of any connection error, an error message will be displayed.
Save to file
Press Save to file to save all settings in a file. This file can be copied to the USB key and then
loaded onto the unit or re-opened with the K-EXPAND software. The file extension is kdu
and cannot modified.
There are no constraints on the name.
Open file
Press to recall a file previously saved on a PC with K-Expand or on a USB key directly on
the K-DUCER. Once the file is selected, the parameters will be loaded automatically on K-
Expand.
Open Terminal
Press to display the print string and the status of the inputs/outputs in the KDU unit.
By selecting the ethernet-MODBUS TCP interface, it is also possible to test the remote
control via ethernet, in particular Start (LEVER), Reverse, Stop Motor, OK, Reset, ESC.

Kolver K-DUCER Specifications

General

Brand	Kolver
Model	K-DUCER
Category	Laboratory Equipment
Language	English