Komatsu 830E - HOUR Lubrication and Maintenance Checks

P02039 Lubrication and Service P2-7
100 HOUR LUBRICATION AND MAINTENANCE CHECKS
Maintenance for every 10 & 50 hour Lubrication and
Maintenance Checks should also be carried out at
this time.
1. * HYDRAULIC SYSTEM FILTERS - Replace fil-
ter elements after the initial 50, 100, and 250
hours of operation; then at each 500 hours of
operation thereafter.
* These checks are required only after the initial
hours of operation (such as: the commissioning of a
new truck, or after a new or rebuilt component instal-
lation).
Truck Serial Number_________________________
Site Unit Number ___________________________
Date:_______________Hour Meter: ____________
Name of Service Person _____________________
COMMENTS √
√√
√’d INITIALS