Kontron CP3002 - Technical Specifications; CP-RIO3-04 Rear I;O Module Main Specifications

CP-RIO3-04 Rear I/O CP3002
Page B - 4 ID 1042-9252, Rev. 2.0
P R E L I M I N A R Y
B.2 Technical Specifications
Table B-1: CP-RIO3-04 Rear I/O Module Main Specifications
CP-RIO3-04 SPECIFICATIONS
External Interfaces
USB Two USB 2.0 interfaces; two 4-pin connectors
VGA One VGA interface; 15-pin D-Sub connector
Ethernet Two Gigabit Ethernet interfaces implemented as dual RJ-45 connector without LEDs
COM Two onboard, RS-232 serial ports with full modem support, COMA (COM1) and
COMB (COM2)
On the 8HP version, the serial ports are routed to the front panel and implemented as
two 9-pin D-Sub connectors.
Internal Interfaces
SATA Two SATA interfaces implemented as two 7-pin, L-form standard SATA connectors
Peripheral Control One 10-pin, 2.54 mm onboard connector for power supply management
Compact PCI CompactPCI connector for connecting rear I/O to the backplane
COM Two COM ports implemented as two 10-pin, 2.54 mm onboard connectors (4HP only)
full modem support
General
Temperature Range Operational: 0°C to +60°C
Storage: -55°C to +85°C
Climatic Humidity 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions 100 mm x 80 mm
Board Weight 4HP: 120 grams
8HP: 150 grams