Korg microSAMPLER User Manual

microSAMPLER
54
9. PAN.DELAY (Stereo Auto Panning Delay)
This is a stereo delay that uses an LFO to pan the delay sound to left and
right.
DRY/WET .............................................................. [DRY, 99:1...1:99, WET]
Adjusts the balance between the effect sound and the direct sound.
BPM SYNC (Delay Time Tempo Sync) ........................................... [OFF, ON]
☞p.52 “BPM SYNC (Delay Time Tempo Sync)”
TM RATIO (Time Ratio) ................ [BPM SYNC OFF: 0.5...400.0% (OVER)
/BPM SYNC ON: 12.5...400.0% (OVER)]
☞p.52 “TM RATIO (Time Ratio)”
L DELAY, R DELAY (L, R Delay Time) .......................[0...1400ms, 1/64... 1/1]
☞p.53 “L DELAY, R DELAY (L, R Delay Time)”
FEEDBACK .....................................................................................[0...127]
☞p.53 “FEEDBACK”
MOD.DEPTH .................................................................................[0...127]
Adjusts the depth of modulation.
LFO SYNC (LFO Tempo Sync) ........................................................ [OFF, ON]
☞p.48 “LFO SYNC (LFO Tempo Sync)”
LFO FREQ (LFO Frequency) .........................................[0.01...100.00 Hz]
☞p.48 “LFO FREQ (LFO Frequency)”
SYNC.NOTE (LFO Sync Note) ..................................................[8/1...1/64]
☞p.48 “SYNC.NOTE (LFO Sync Note)”
LFO WAVE (LFO Waveform) ............ [SAW, SQUARE, TRIANGLE, SINE, S&H]
☞p.48 “LFO WAVE (LFO Waveform)”
LFO.SHAPE ................................................................................... [–63...+63]
Adjusts the shape of the LFO waveform.
KEY SYNC (LFO Key Sync) .............................................................. [OFF, ON]
☞p.49 “KEY SYNC (LFO Key Sync)”
INI.PHASE (LFO Init Phase) .............................................................[0...180º]
☞p.49 “INI.PHASE (LFO Init Phase)”
LFO SPRD (LFO Spread) ......................................................... [–180...+180º]
Specifies the LFO phase difference between the left and right channels.
HI DAMP ........................................................................................ [0...100%]
Specifies the amount of high-frequency damping.
TRIM .................................................................................................. [0...127]
Adjusts the input level to the external device.
10. MOD.DELAY (Stereo Modulation Delay)
This is a stereo modulation delay.
DRY/WET .............................................................. [DRY, 99:1...1:99, WET]
Adjusts the balance between the effect sound and the direct sound.
BPM SYNC (Delay Time Tempo Sync) ............................................ [OFF, ON]
☞p.52 “BPM SYNC (Delay Time Tempo Sync)”
TM RATIO (Time Ratio) ................ [BPM SYNC OFF: 0.5...400.0% (OVER)
/BPM SYNC ON: 12.5...400.0% (OVER)]
☞p.52 “TM RATIO (Time Ratio)”
Dry / Wet
Dry / Wet
LFO Spread
LFO Shape
LFO
Depth
Depth
Delay
High Damp
High Damp
Feedback
Trim
Trim
Left
Right
Wet: Mono In - Stereo Out
Feedback
LFO Spread
Dry / Wet
Dry / Wet
LFO
Delay
Delay
Left
Right
Wet: Stereo In - Stereo Out

Korg microSAMPLER Specifications

General

Sampling Frequency	48 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Type	Sampler Keyboard
Keyboard	37 keys (velocity sensitive)
Number of Samples	36 per bank
Sequencer	16, 000 notes
Display	16 character x 2 line LCD
Outputs	L/Mono, R (1/4" Phone), Headphones (1/4" Stereo Phone)
USB	USB MIDI
Power Supply	AC adapter (included)
Inputs	Audio Input (1/4" Phone), Mic Input (1/8" Phone)