Write
15
Editing names
1. On the Write page, select the Name.
2. Press ENTER, or turn the VALUE dial.
The Name page appears.
3. Use the cursor buttons to move back and forth in the text, and use VALUE to select a character from the set
shown below.
Names can be up to 24 characters long.
4. Press SHIFT to toggle between A-Z, a-z, numbers, and symbols.
5. Hold SHIFT and press > (PAGE+) to insert a space.
6. Hold SHIFT and press < (PAGE-) to delete the previous character.
7. When you’ve finished entering text, press ENTER to return to the previous page, or SHIFT-ENTER to cancel.
Write Metadata
This shows the Categories for the item shown on the Write page.
Note: When Type is set to Set List Slot, this page is not available.
Category 1/2
[List of Categories]
Each object type—Performances, Programs, etc.—has its own list of Categories. You can create new Categories using
the Editor Librarian software, if desired. Note that only the first 15 Categories are mapped to the front-panel buttons.
Compare
Select
[Saved Performance, Edited Performance]
Saved Performance: The saved version of the Performance will be heard.
Edited Performance: The edited version of the Performance will be heard. If the Performance has not been edited, this
is not available.
To Next Page
Loading...
