Selecting and Playing Sounds
4
Selecting and Playing Sounds
Selecting Sounds
Selecting Performances from the display
1. Press the PERFORM button, and if necessary press it again.
Wherever you are in the system, the second press will always bring up the home page, with the large Performance
name selected.
2. Follow the instructions under “Selecting from lists,” below.
Selecting from lists
Note: These instructions also apply to selecting Set Lists, Performances, Programs, Effects Presets, Motion Sequences,
Wavetables, Multisamples, and Lane Presets.
1. Cursor to the item that you’d like to select.
For this example, we’ll use Performances, continuing from above.
2. Turn the VALUE knob or press ENTER.
A popup appears, showing a list of sounds.
3. Turn the VALUE knob or use < and > to select sounds. Hold ENTER and press < or > to jump by 5.
You can play the sounds as you scroll through the list.
4. When you find a sound that you like, press ENTER again (or SHIFT-ENTER to cancel).
Using Categories
You can filter the list by category or collection. To do so:
1. While the list is onscreen, press CATEGORY buttons 2 (BASS) to 16 (USER) to show only a specific category
of sounds.
2. To show all sounds again, press button 1 (ALL).
The category names on the front panel apply to Performances, Programs, and Multisamples; for all other types of data
(Wavetables, Motion Sequences, etc.), the buttons select the first 15 Categories in the list.
Performance Name
Layer Programs
Category or Collection Sort OrderData Type
Page Indicators
Scroll Bar
To Next Page
Loading...
Need help?
General
