Kaoss Physics
46
Kaoss Physics
Physics (SHIFT- KAOSS)
[Off, On]
Off: The physics model is disabled, and the pad works as a simple x-y pad.
On: The physics model is enabled.
P (Kaoss Physics Preset)
[List of Presets]
Select the parameter and then either turn the VALUE knob or press ENTER to bring up the Preset Select popup, which
shows all of the Kaoss Physics Presets installed on the instrument. For details on sorting and filtering the list, see
“Selecting from lists” on page 4.
Tilt X
[-100…+100]
Tilts the plane from left (negative) to right (positive).
Tilt Y
[-100…+100]
Tilts the plane from down (negative) to up (positive). For instance, tilting Y downward creates “gravity” towards the
bottom.
Friction
[0…100]
Controls the energy absorption as the ball travels across the surface.
Time
[0.00x…1.00x]
Slows down time. Note that 1.00 (normal speed) is the maximum; if you want to both speed up and slow down, start at
a value in the middle.
To Next Page
Loading...
Need help?
General
