Motion Sequencing 2.0
40
Pitch Lane Step
Step
See “Step” on page 37.
Transpose
[-24…+24 semitones]
This offsets the played note by up to two octaves, up or down.
If the Oscillator is playing a Multisample, this also affects the index into the Multisample map (unlike Tune below),
potentially changing the sample selection, similar to transposing the entire keyboard.
Tune
[-12.00…+12.00 semitones]
This changes the tuning by up to one octave up or down.
Transition
[Off, Lin, Exp, Log]
This controls the transition from this step to the next step: whether the pitch changes abruptly at the next step, or
glides to the new value.
This applies only if the Pitch Lane Transitn parameter is set to Indv (Individual).
Off: Pitch will change abruptly at the next step. This is the default.
Lin: The pitch will glide linearly to the next step.
Exp: The pitch will glide to the next step, with most of the change at the end of the glide.
Log: The pitch will glide to the next step, with most of the change at the start of the glide.
Probability
See “Step Probability” on page 35.
To Next Page
Loading...
Need help?
General
