Filter
56
Envelope (ENV INTENSITY)
[-142.00…+142.00]
This sets the amount of modulation from the Filter Envelope, in semitones.
Vel->Env (VELOCITY)
[-142.00…+142.00]
This lets you use velocity to scale the amount of the Filter Envelope applied to Filter Freq, in semitones.
Key Track (SHIFT-CUTOFF)
[-142.00…+142.00]
This controls how much the Key Track will affect the Cutoff frequency. The overall effect of the Keyboard Track is a
combination of this value and the overall Keyboard Track shape.
With positive values (+), the effect will be in the direction specified by keyboard tracking; if the Slope goes up, the
Cutoff will increase.
With negative values (–), the effect will be in the opposite direction; if the Slope goes up, the Cutoff will decrease.
To create one-octave-per-octave key tracking (useful when creating pitch through filter resonance):
1. Set the Key Track amount to +60.00 semitones.
2. In Filter Key Track, set Low and Low-Mid Slopes to -1.00, and Mid-High and High Slopes to +1.00.
To Next Page
Loading...
