Modulation Sources
59
Note Number
is provides simple key tracking. C4 is the center, with a value of 0. Below C4 is negative, to a minimum at MIDI note
0; above C4 is positive, to a maximum at MIDI note 127.
Aftertouch and Poly Aftertouch
ese are MIDI Aertouch and Poly Aertouch, respectively, representing pressure on the keyboard aer note-on.
Aertouch can be globally switched to respond to Channel Aertouch, Poly Aertouch, both, or neither; for details,
see “Aertouch Source” on page 20.
Kaoss X
Kaoss X is the horizontal position of the Kaoss ball: negative to the le of center, 0 in the middle, and positive to the
right.
Kaoss Y
Kaoss Y is the vertical position of the Kaoss Ball: negative below the center, 0 in the middle, and positive above the
center.
Kaoss Distance
Kaoss Distance is the distance from the center, which is always positive.
Kaoss Angle
Kaoss Angle is the current angle of the ball relative to the x axis. e value is always positive, regardless of whether it is
above or below the x axis.
Mod Knobs
is section of the Modulation Sources list contains the 4 Mod Knobs.
Generators
Filter/Amp/Osc 1/Osc 2 Envelope
ese are the four ADSR envelopes.
Filter/Amp/Osc 1/Osc 2 /Pitch LFO
ese are the ve LFOs.
Filter/Amp Key Track
ese are the Key Track generators from the Filter and Amp, respectively.
Mod Process 1/2
ese are the two Mod Processors.
Step Pulse
is generates a brief trigger pulse at the start of each Motion Sequence Step.
Step Seq A-D
ese are the outputs of the four Step Seq Lanes.
Tempo
is lets you use the system tempo as a modulation source. 120 is the center, for a value of 0; 60BPM is -100,
and 240BPM is +100 (the value continues to increase up to 300BPM). Note that this is dierent from tempo
synchronization; for that purpose, use the dedicated Tempo functions for the LFOs, Motion Sequence, and eects.
Program/Performance Note Count and Program/Performance Voice Count
ese use the number of notes played on the keyboard, or the number of voices being played by the synth engine, as
modulation sources. e Performance variations count all notes or voices in the Performance, while the Program
variations only include those in the current Program.
# Notes/Voices Resulting value
1
0.0
2
0.01