Korg modwave native User Manual

Modulation Processors
78
Smooth
is creates more gentle transitions between values, smoothing out abrupt changes such as a quick move on a wheel or
a sharp edge on an LFO.
You have separate control of the amount of smoothing during the attack (when the signal is increasing) and decay
(when it’s decreasing).
Low settings provide subtle controller smoothing, creating more gradual aertouch, for instance. Higher settings create
auto-fade eects, transforming a quick gesture into a longer fade-in and/or fade-out event.
Smoothing can also be used to alter the shape of programmable mod sources, such as LFOs and envelopes. For
instance, you can turn a “blip” into a simple envelope shape, as shown below.
Input
[List of Modulation Sources]
is selects the input for the Mod Processor.
Attack
[0.000…10.000 sec]
is controls how long it takes the smoother to reach a new,
higher value. Higher settings mean longer times.
Decay
[0.000…10.000 sec]
is controls how long it takes the smoother to reach a new, lower
value. Higher settings mean longer times.
Sum
Output
Main Input
Sum Source
Main Input Amount
Sum Source Amount
Sum adds two modulation sources together. is is useful if you want to process the combination of two or more
signals: for instance, to merge an LFO and an envelope, and then smooth the result.
Input
[List of Modulation Sources]
is selects the main input for the Mod Processor.
Main Input Amount
[–100%…+100%]
is controls the gain and polarity of the Input.
Sum Source
[List of Modulation Sources]
is selects the modulation source to merge into the Input.
Sum Source Amount
[–100%…+100%]
is controls the gain and polarity of the Sum Source.
Original Input
Smooth with long Attack
and short Decay
Smooth with short Attack and long Release

Korg modwave native Specifications

General

Brand	Korg
Model	modwave native
Category	Synthesizer
Language	English