Korg modwave native User Manual

Set Lists
94
Destination Drag action Edit action Aect on Original Slots
Dierent Set List
On top of a Slot Paste
Original Slots always remain unchanged
Between Slots Insert Before
Note that dragging to a dierent Set List always leaves the original Slots intact; option-drag is not required.
Set List contextual menu
Right-click or control-click (macOS) on a Slot to bring up the contextual menu.
Delete
is removes the selected Slot, and changes it to use the Init Performance.
Note that factory data may not be deleted or changed. Also, there must always be at least one Set List; if there is only a
single Set List in the system, it cannot be deleted.
Cut
is cuts the selected Set List Slot(s), placing them on the clipboard, and changes them to use the Init Performance.
Cut and Shift Slots
is cuts the selected Set List Slot(s), and shis all other Slots to ll in the gap. e newly empty Slots at the end of the
Set List will be lled by the Init Performance.
Copy
is copies the selected Set List Slot(s), and places their data on the clipboard for use in Paste or Insert Before.
Paste
is replaces the selected Set List Slot, and potentially subsequent Slots, with the data on the clipboard. If multiple Slots
are selected, only the lowest-numbered selection aects the Paste operation; other selections are ignored.
Important: if the clipboard contains multiple Slots, Paste will start with the rst selected Slot and then replace
as many Slots as necessary, regardless of how many other Slots are selected. For example, if there are four Slots
on the clipboard, and you select Slots A3 and A7 and then Paste, Slots A3, A4, A5, and A6 will be replaced with
the data from the clipboard.
Insert Before
is inserts the data on the clipboard into the Set List before the selected Set List Slot, and shis subsequent Slots to
make room. Slots at the end of the Set List will be “pushed o the end” and removed.
As with Paste, if multiple Slots are selected, only the lowest-numbered selection aects the Insert Before operation;
other selections are ignored.
Duplicate
is duplicates the selected item.
Select All
is selects all Slots in the Set List.
Deselect All
is clears any selected Slots.
New Set List
is creates a new Set List, with all Slots set to the Init Performance. It is available from the Librarian when showing
either All Data or Set Lists.
Make Active
When an active Set List window is open, this selects the current Set List Slot. When an inactive Set List window is open,
this selects the Performance assigned to the Set List Slot.

Korg modwave native Specifications

General

Brand	Korg
Model	modwave native
Category	Synthesizer
Language	English