EasyManuals Logo

Korg Trinity V3 User Manual

Korg Trinity V3
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
51: Track Edit
108
To delete only the tempo change data from the master track, use this command, or 51C: Event
Edit or 51M: Erase Control Data.
Be aware that if control data straddles the boundary of the erased area, only the data that lies
in the erased area will be erased. Also, if you erase measures that fall within the length of a
long-held note that extends the length of several measures, the note data in subsequent mea-
sures will also be erased.
51H: Delete Measure
This command deletes specied measures from the track selected in the tab 1 display.
Unlike the Erase Measure command, the Delete Measure command will cause measures following
the deleted measures to be moved forward to ll the gap.
If All Tracks (step 3) is un-checked when this command is executed, the master track will not
be affected. The time signature and tempo data will remain unchanged, and the time signature
and tempo will change for the measures that were moved forward as a result of the delete
operation.
1 In the tab 1 display, select the track from which measures will be deleted, and specify the Start
Measure and End Measure.
2 When this command is selected, a dialog box shown at
right will appear.
3 If you wish to delete measures from all tracks including
the master track, check All Tracks.
If this is un-checked, measures will be deleted from the
track specied in the tab 1 display.
4 To execute the Delete Measure command, press the OK
button. To cancel without executing, press the Cancel
button.
21 543
1 4 52 3
No data
Example: If measures 2
3 are erased, measures 23 will be blank.
Before Erase
After Erase
1 2 3 4 5 6
21
7 8
543
Example: When measures 35 are deleted, measures 68 are moved forward.
Before Delete
After Delete
Track 2
2 (3/4)1 (4/4) 3 (3/4)
Track 1
2 (3/4)1 (4/4) 3 (3/4) 4 (4/4) 5 (4/4)
1 (4/4) 3 (3/4) 5 (4/4)2 (3/4) 4 (4/4)
Track 2
1 (4/4) 3 (3/4) 5 (4/4)2 (3/4) 4 (4/4)
Track 1
Before Delete
After Delete
Example: When measures 2 and 3 (3/4 time) of track 2 are deleted, the measures that were at 4 and 5 are moved
forward, and their time signature will change to 3/4.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Korg Trinity V3 and is the answer not in the manual?

Korg Trinity V3 Specifications

General IconGeneral
BrandKorg
ModelTrinity V3
CategoryRecording Equipment
LanguageEnglish

Related product manuals