42
Operating Instructions 10/2020 2010045v10
8 Maintenance guide
8.1 Cleaning the DC Wallbox
The DC Wallbox must be kept in good condition. Clean the charging station three times a year as follows:
1. Remove dirt with a soft damp plastic fleece cloth.
2. Optionally, you can treat the front with a stainless steel cleaner for extra protection and shine.
ATTENTION
Normal cleaning
Keep the air inlets clean and ensure that they are free of snow and leaves or
other materials.
ATTENTION
Rust formation
If the charging station is installed in an environment that is sensitive to
corrosion, the formation of superficial rust at the welding points is possible.
This rust is only visual, there is no risk of the control cabinet rusting through.
ATTENTION
If the DC wall box is exposed to rain, it is sufficient to clean it twice a year.
CAUTION
Do not use high-pressure water jets. Water can get into the control cabinet. If
a high-pressure water jet has been used, make sure that the inside of the
control cabinet is dry.
Do not use cleaning agents with abrasive ingredients.
Do not use abrasive tools.
To Next Page
Loading...