7
Operating Instructions 10/2020 2010045v10
4 Introduction
4.1 Foreword
The Kostad DC Wallbox is an easy-to-install DC fast charging system for electric vehicles. Thereby
is an electrical installation with high electrical currents. This manual describes the general operation and daily
operation of the DC Wallbox.
4.2 Purpose of this manual
As a reference for site operators who are responsible for operating the charging station on site, carrying out
day-to-day inspection and maintenance work and taking measures for simple troubleshooting as instructed by
a Kostad-certified technician.
The user interface design has been thoroughly evaluated with user groups to optimize intuitive operation and
achieve the best user experience.
4.3 Appropriate use of the charger
The outputs of the charging station are used exclusively for charging electric vehicles that are compatible
with the supported charging standards.
4.4 Danger signs
The following symbols are used on the unit and in this manual:
DANGER
Warning of electrical voltage
Indicates a hazard that could result in serious injury or death.
can lead to death by electric shock.
WARNING
General warning sign
Indicates a hazard that can cause serious injury or death, as well as damage
to the installation, other equipment and/or environmental pollution.
4.5 Safety instructions
ATTENTION
If a charging station is damaged, proceed as follows:
Do not use the damaged charging station.
Contact the owner / site operator.
To Next Page
Loading...