1-4 BA 348-01 * 2.0 * 34801b110.fm
1 Introduction
Maintenance, repair work, spare parts
In order to ensure the machine’s operational safety, readiness and service life, maintenance
must be performed regularly – see chapter 5 “Notice on maintenance and servicing” on
page 5-1 and Maintenance plan on page 5-42.
Repair work, maintenance or modifications may only be performed by specifically
trained technical personnel or by a service centre.
Insist on using original spare parts for repairs.
The machine’s permits, certifications, registrations, etc., may be withdrawn if
machine parts/components with a prescribed condition or quality, or machine
parts/components that can put persons at risk during operation, are subsequently
modified or exchanged.
To Next Page
Loading...
