BA 348-01 * 2.0 * 34801b110.fm 1-15
Introduction 1
The type label is located on the machine frame, at the front right in travel direction
(on one side of the loader unit bulkhead).
The CE mark on the type label means that the machine meets the requirements of the
Machine Directive (2006/42 EC) and that the conformity procedure has been performed.
The CE mark is valid only in countries where the EU machine guideline (2006/42 EC) is
applied!
For more data, see
Cabin number
The type label (arrow) is located in the cabin, at the top right in travel direction.
Example: type label
1 Machine designation Wheel loader (350)
2 Serial no. 348 01 1922
3 Machine model 348
4 Output (kW) 23
5 Machine model/version 348-01
6 Dead weight (kg) –
7 Transport weight (kg) –
8 Permissible maximum weight (kg) 2250
9 Maximum payload (kg) –
10 Front gross axle weight rating (kg) 1550
11 Rear gross axle weight rating (kg) 1550
12 Gross unbraked trailer weight rating
1
(kg)
1. The trailer coupling option is only for machines with agricultural or forestry registration (option)
–
13 Gross braked trailer weight rating
overrun brake (kg)
–
14 Gross braked trailer weight rating (kg)
overrun brake (1 axle)
–
15 Gross trailer weight rating (kg)
(compressed-air brake)
–
16 Check number of EC approval for
machines with agricultural or forestry
licence (option)
See National Type Approval
(Germany), Data Confirmation
(Germany) or registration documents
17 Year of construction 2013
Fig. 6 : Cabin type label (option)
To Next Page
Loading...
