BA 348-01 * 2.0 * 34801b330.fm 3-41
Operation 3
Functional check of all control elements
• –seeChecking the steering system on page 3-44
• –seeBrake/inching pedal on page 3-48
• –seeParking brake on page 3-50
• –seeMachine lights (option) on page 3-57
• –seeSignalling system on page 3-59
• –seeOperating and securing the 3rd control circuit (standard) on page 3-65 or
–seeElectrical operation and locking of 3rd control circuit (option) on page 3-67
• –seeWasher system (option) on page 3-62
Transport position of attachments on public roads
☞Empty and tilt in the bucket A
☞Cover the blade or teeth of the bucket across their entire width with the tooth guard B
provided
☞Use a suitable means of transport to move or transport buckets/attachments that are
not authorized for transport on public roads
➥–seeFields of application and using the wheel loader with an attachment on
page 1-12
☞Raise the loader unit until both red marks D on the lift frame and the bulkhead are aligned
Ground clearance for transport C in connection with the standard bucket and
standard tyres is about 200 mm.
☞Lock the control lever (loader unit) and the 3rd control circuit
–seeLock for loader unit control lever and mechanical locking of 3rd control circuit
(standard) on page 3-42
–seeLock for loader unit control lever and electrical lock for 3rd control circuit lever
(option) on page 3-43
Fig. 63 : Transport position of attachment
C
B
A
D
To Next Page
Loading...
