2-2 BA 348-01 * 2.0 * Sicherheit_Radlader.fm
2 Safety instructions
2.2 Designated use and exemption from liability
• Carrying or transporting accompanying persons in the cabin or on the wheel
loader is prohibited! Carrying or transporting persons in the attachments
(bucket, pallet forks, for example) is prohibited!
• The machine may not be used for transport jobs on public roads!
• Using the machine with an overheated engine silencer and/or brake discs in
areas posing a fire hazard (hay or straw storage facilities, etc.) is prohibited!
• The machine is intended for:
• moving earth, gravel, coarse gravel or ballast and rubble, and for applications with
the attachments listed in chapter Introduction!
• Every other application is regarded as not designated for the use of the machine.
The manufacturer will not be liable for damage resulting from use other than mentioned
above. The user alone will bear the risk.
Designated use also includes observing the instructions in the Operator’s Manual and
observing the conditions of maintenance and service!
• Observe the pertinent regulations relevant to accident prevention, other generally
acknowledged regulations regarding safety and occupational medicine, as well as the
regulations and standards relevant to motor vehicles and traffic which are valid in your
country. Get informed on and follow the legal regulations of your country.
The manufacturer shall not be liable for damage resulting from the failure to observe
these regulations!
• The safety of the machine can be negatively affected by performing machine
modifications without proper authority and by using spare parts, equipment, attachments
and optional equipment which have not been checked and released by the manufacturer.
The manufacturer will not be liable for damage resulting from this!
• The manufacturer shall not be liable for personal injury and/or damage to property
caused by failure to observe the safety instructions and the Operator’s Manual,
and by the negligence of the duty to exercise due care when:
• handling
• operating
• servicing and performing maintenance and
• repairing the machine. This is also applicable in those cases in which special
attention has not been drawn to the duty to exercise due care, in the safety
instructions as well as in the operation and maintenance manuals (machine/engine).
• Read and understand the Operator’s Manual before starting up, servicing or repairing
the machine. Observe the safety instructions!
• In applications with lifting gear, the machine is used according to its designated use
only if the mandatory
Devices are installed and functional!
To Next Page
Loading...
