5-40 BA 348-01 * 2.0 * 34801b511.fm
5 Maintenance
5.20 Explanation of symbols on the maintenance label
Symbol Explanation
Before starting maintenance, follow the safety instructions in the Operator’s Manual!
Before starting maintenance, read the “Maintenance” chapter in the Operator’s Manual!
Perform a functional check of the light system!
Check tyres for damage, inflation pressure and tread depth!
Perform a functional check and synchronize the steering system!
Perform a functional check of the braking system!
Check hydraulic oil level. Add oil if necessary!
Check engine oil level. Add oil if necessary!
Air filter, squeeze the dust valve
Check radiator for engine coolant and hydraulic oil for dirt. Clean if necessary!
Check condition and initial tension of V-belt. Retighten or replace if necessary!
Leakage check:
Check for tightness, leaks and chafing: pipes, flexible lines and threaded fittings. Rectify if necessary!
Leakage check:
Check the fuel/water separator. Drain water if necessary!
Lubrication service:
Lubricate the assemblies concerned!
To Next Page
Loading...
