3-46 BA 348-01 * 2.0 * 34801b330.fm
3 Operation
3.26 Manual throttle (option)
Actuating the manual throttle
Manual throttle lever A is located at the right of the centre console.
Risk of accidents! Travelling on public roads with the machine in a controlled
manner is not possible with manual throttle lever A!
☞Use the manual throttle during work operation only!
☞Before machine travel on public roads:
• Move the manual throttle lever A to idling speed position S
• Set the engine speed with the accelerator pedal only
Risk of accidents! The machine accelerates in an uncontrolled manner if the
forward-reverse control is actuated at preselected engine speed!
☞Actuate the forward-reverse control only if the brake/inching pedal is
pressed or if the manual throttle lever is in neutral position
Risk of accidents! In an emergency situation, immediately press the brake/
inching pedal and push the manual throttle lever A backward to the limit S!
Furthermore, reset the manual throttle lever A to the limit S before starting the
diesel engine again!
The manual throttle is especially useful for operating hydraulic attachments
which need a continuous supply of hydraulic oil. Travel speed must be set with
the brake/inching pedal or with the low-speed control (option).
Function
Permanent setting of diesel engine speed for work operation.
☞Preselect the engine speed as follows:
• Press the brake/inching pedal to the inching range –seeBrake/inching pedal on
page 3-48
• Preselect the travel direction –seeChanging direction (forward/reverse) on page 3-51
• Set the required engine speed with the manual throttle lever
➥ S = idling speed (minimum engine speed)
➥ V = full speed (maximum engine speed)
• Slowly release the brake/inching pedal
Fig. 66 : Manual throttle (option)
A
S
V
To Next Page
Loading...
