Kramer KDS-SW2-EN7 User Manual

Kramer Electronics Ltd.
KDS-SW2-EN7 – Contents
i
Contents
Introduction 1
Getting Started 1
Overview 2
Typical Applications 3
Defining KDS-SW2-EN7 4
Defining KDS-SW2-EN7 4
Mounting KDS-SW2-EN7 6
Connecting KDS-SW2-EN7 and KDS-DEC7 7
Connecting the Audio Input/Output 8
Understanding LED Functionality 9
Connecting to KDS-SW2-EN7 via RS-232 9
Operating and Controlling KDS-SW2-EN7 10
Configuring the Network Switch 10
Using Menu Navigation Buttons 10
Operating via Ethernet 13
Using KDS-SW2-EN7 Embedded Web Pages 18
Defining AV Routing Parameters 20
Defining Auto Switching 20
Defining Signal Loss Timeouts 22
Defining HDMI Input Settings 23
Defining Audio Settings 25
Managing EDID 27
General Device Settings 28
KDS-SW2-EN7 Network Settings 32
Defining KDS-SW2-EN7 Time and Date 34
Setting KDS-SW2-EN7 Security 35
Defining KDS-SW2-EN7 User Access 38
Defining KDS-SW2-EN7 Gateway Settings 41
Viewing KDS-SW2-EN7 Status 44
Viewing KDS-SW2-EN7 Connections Status 45
Viewing KDS-SW2-EN7 Advanced Status 46
Viewing the About Page 47
KVM Roaming, OSD menu and Fast Switching 48
Configuring KVM Roaming 49
Fast switching configuration 52
Upgrading Firmware 53
Technical Specifications 54
KDS-SW2-EN7 Specifications 54
Default Communication Parameters 55
Default EDID 55
Default Parameters 58
Protocol 3000 59
Understanding Protocol 3000 59
Protocol 3000 Commands 60
Result and Error Codes 75

Kramer KDS-SW2-EN7 Specifications

General

Brand	Kramer
Model	KDS-SW2-EN7
Category	Media Converter
Language	English