KDS-SW2-EN7 – Using KDS-SW2-EN7 Embedded Web Pages
Setting KDS-SW2-EN7 Security
The Security tab configures device 802.1x authentication to limit unauthorized access, and
HTTPS/TLS for establishing an encrypted connection to an authenticated peer over the
network.
This section describes the following actions:
• Configuring HTTPS on page 35.
• Defining 802.1x Authentication on page 36.
Contact your IT administrator for the network access authentication.
Configuring HTTPS
To configure HTTPS:
1. In the Navigation pane, click Device Settings. The General tab in the Device Settings
page appears (see Figure 18).
2. Select Security tab. The Security tab appears.
Figure 21: Device Settings Page – Security Tab