Defining HDMI Input Settings
Define KDS-SW2-EN7 video settings.
To define HDMI input settings:
1. In the Navigation pane, Select AV. The Auto Switch tab in the AV Routing page appears
(see Figure 13).
Figure 15: AV Settings Page – Video Tab
2. Define the following settings:
▪ Input 1/2: enable (ON)/disable (OFF) HDCP support for each input or for both
together.
When turning the HDCP off on an input, that non-HDCP input source can be
routed to the output (for example, for in Apple devices).
To Next Page
Loading...
Need help?
General
