SSID: Enter the name of the Wi-Fi network - Make sure that you write it
EXACTLY as defined. (It is case sensitive!).
Authentication Mode: Select the security used by your Wi-Fi access point
among the pre-set options (WEP Open/ WEP Shared/ WPA Personal/
WPA2 Personal.
Encryption: Select the type of encryption key used by your router.
Key: Type the password required to join your network (up to 50 characters
max).
Apply Settings to save the configuration. There is no need to reboot your
unit.
Pair your VIA Pad devices as shown below:
7.2.6 Configuring a Gateway to be Managed by VSM
VSM (VIA Site Management) is an optional, web-based software application
(subject to a separate pricing) that enables an administrator to monitor and make
changes to all connected VIA GO or all VIA gateways connected to the network.
VSM enables and administrator to:
Add or modify an existing VIA gateway (Collage/Campus/Connect
PRO/GO)
Configure settings for VIA Collage/Campus/ConnectPRO/GO units by
remotely accessing the embedded web pages in the units (see
section 7.2.1)
Update VIA Collage/Campus/ConnectPRO/GO units from the VSM when
the updates become available
To Next Page
Loading...
Need help?
General
