Kramer VIA GO User Manual

VIA GO - Configuring VIA GO
85
Once FW version 2.2.1017.918 is installed, you will no longer be required
to upload an authentication file in order to enable future FW updates.
To update VIA GO, ONLY use the .rpm file available for download from our
technical support Web page: www.kramerav.com/support/downloads.asp.
Upon completion of the process, reboot the unit.
Note: that the upload process and then the unit reboot may take a few minutes.

Kramer VIA GO Specifications

General

Wireless Presentation	Yes
Ethernet	10/100/1000 Mbps
Network Connection	Ethernet, Wi-Fi
Operating System Compatibility	Windows, macOS, Android, iOS
HDMI Output	1
Audio	3.5mm audio jack
Wi-Fi	802.11 a/b/g/n
Compatibility	Projectors, Displays
Input Ports	Ethernet, USB
Power Supply	5V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-40 to +70°C (-40 to 158°F)
Security	WPA & WPA2
Weight	200 g