Setting HDCP
You can enable or disable HDCP for each of the HDMI inputs.
To set HDCP on or off:
1. Press and hold EDID and RCL.
Both buttons illuminate and the IN buttons indicate the HDCP status:
▪ HDCP 1.4 enabled (on): IN button is illuminated.
▪ HDCP 2.2 enabled (on): IN button flashes.
▪ HDCP disabled (off): IN button is off.
2. Press one or more input buttons to change their status.
The LOCK button flashes.
3. Press LOCK.
The HDCP settings are saved.
To Next Page
Loading...
