Kramer VS-88H2

Kramer Electronics Ltd.
VS-88H2 – Technical Specifications
59
Default Communication Parameters
RS-232/Ethernet
Baud Rate:
115,200
Data Bits:
8
Stop Bits:
1
Parity:
None
Command Format:
ASCII Protocol 3000
Example (Route input 1 to output 1):
#VID 1>1<CR>
Ethernet Parameters
IP Address:
192.168.1.39
Subnet Mask:
255.255.0.0
Default Gateway:
192.168.0.1
Default TCP Port #:
5000
Default UDP Port #:
50000
Number of TCP ports:
8
Number of web clients:
5
Default username:
Admin
Default password:
Admin
Full Factory Reset
Front Panel Buttons:
Power off the device, press and hold the LOCK, EDID and STO
buttons simultaneously for about 3 seconds while powering the
device, and then release. Until all front panel buttons illuminate
Protocol 3000:
“#factory” command.
Web Pages:
In the Device Settings page, click Reset.