Using Embedded Web Pages
The web pages let you control the VS-88H2 via the Ethernet. The web pages include all the
OSD items and more and are accessed using a Web browser and an Ethernet connection.
Before attempting to connect:
• Perform the procedures described in Connecting VS-88H2 via the ETHERNET Port on
page 10.
• Ensure that your browser is supported.
The following operating systems and Web browsers are supported:
The VS-88H2 web pages enable performing the following:
• Switching and Setting Ports on page 29.
• Changing Device Settings and Upgrading Firmware on page 40.
• Managing Web Page Security on page 42.
• Managing Timeout on page 46.
• Setting Switching Modes on page 48.
• Setting Step-in Devices on page 51.
• Managing the EDID on page 53.
• Viewing About Page on page 57.
To browse the VS-88H2 web pages:
1. Open your Internet browser.
2. Type the IP address of the device in the address bar of your browser. For example, the
default IP address:
The Authentication window appears (if set, security is enabled):
To Next Page
Loading...
