EasyManuals Logo

Krone ActiveMow R 200 User Manual

Krone ActiveMow R 200
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Safety 2
Basic safety instructions 2.3
ActiveMow R 200
Original Operating Instructions 150000521_04_en 15
Danger resulting from damage to the machine
Damage to the machine may impair the operational safety of the machine and cause accidents.
As a result, people may be seriously injured or killed. The following parts of the machine are
particularly important for safety:
Brakes
Steering
Safety Devices
Connecting devices
Lighting equipment
Hydraulics
Tyres
Universal shaft
If there are doubts about the operational safety of the machine, for example due to an
unexpected change to the operational behaviour, visible damage or leaking consumables:
Shut down and secure the machine, refer to page24.
Immediately eliminate potential causes of damage, for example heavy soiling, or tighten
slack screws.
In case of damage which may affect operational safety and cannot be repaired according to
these operating instructions: Have damage repaired by a qualified service centre.
Technical limit values
If the technical limit values of the machine are not observed, the machine may be damaged. As
a result, accidents may occur and people may be seriously injured or killed. Observance of the
following technical limit values is particularly important for safety:
Maximum permissible operating pressure of hydraulics
Maximum permissible drive speed
Maximum permissible axle loads of tractor
Observe the limits, refer to page34.
2.3.10 Danger zones
If the machine is switched on, its surrounding can present a danger zone.
Avoid entering the danger zone of the machine by observing the minimum safety distance.
If the safety distance is not observed, people may be seriously injured or killed.
Do not switch on the drives and engine if the minimum safety distance has not been
observed.
If people fail to observe the minimum safety distance, switch off the drives.
Switch the machine off in shunting and field mode.
The safety distance is:
For machine in shunting operation and field mode
In front of the machine 30m
Behind the machine 5m
Laterally to the machine 3m

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krone ActiveMow R 200 and is the answer not in the manual?

Krone ActiveMow R 200 Specifications

General IconGeneral
BrandKrone
ModelActiveMow R 200
CategoryLawn Mower
LanguageEnglish

Related product manuals