9 Driving and Transport
9.2 Switching off the machine
52
ActiveMow R 200
Original Operating Instructions 150000521_04_en
ü The relief spring is or the relief springs are relieved,.
Depressurize the tractor hydraulics.
For the “series” version: For the “series” version: Lower the machine until it is resting on
the support jack, refer to page45
For the “additional support jacks” version: Mount the additional support jacks and lower
the machine until it is resting on the additional support jacks,refer to page46.
Lower the machine to the ground via the rear linkage.
Shut down and safeguard the machine, refer to page24.
Remove the universal shaft (3) from the tractor and place it on the storage surface (4).
Close the stop cock(s).
INFORMATION! Problems when connecting the machine the next time. To avoid problems
when connecting the machine the next time, depressurise the hydraulic system before
connecting the hydraulic hoses (5) and close the stop cock(s).
Remove the operating cable (2) from the tractor and place it on the machine.
Detach the top link.
Unlock the lower link hooks of the tractor.
Continue to lower the rear linkage until the lower link pins are free.
Drive the tractor away carefully.
To Next Page
Loading...
Need help?
General
