Krone EasyCut B 870 CV Collect - Hydraulic System; Replacing the Hydraulic Oil Filter

Maintenance - hydraulic system
102
Pos: 156 /Überschr iften/Überschrif ten 2/F-J/Hydraulikan lage @ 0\mod_11972784550 41_78.docx @ 16905 @ 2 @ 1
15.2 Hydraulic system
Pos: 157 /BA/Sonderau sstatung/EasyCut / AM Mähwerke/Querförder er/Hydraulikölfil ter ersetzen EC B 870 CV Collec t @ 231\mod_1393486652 506_78.docx @ 1850209 @ 2 @ 1
15.2.1 Replacing the Hydraulic Oil Filter
Fig. 61
Note
Ensure total cleanliness when changing the filter. The removed filter cartridge must be disposed
of correctly.
Replace the hydraulic oil filter before every season (but at least once year)
• Unscrew the screw cover (1)
• Raise filter insert (2), allow hydraulic oil to drip out
• Pull out the filter insert and make sure that it is disposed of correctly
• Wet the sealing surface of the new filter insert with oil and insert it
• Tighten screw cover (1)
Pos: 158 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1