Krone EasyCut B 870 CV Collect - Control and Display Elements

Control and Display Elements
33
Pos: 100 /Überschr iften/Überschrif ten 1/A-E/Bedien- und Anzeig eelemente @ 107\mod_133 4231983896_78.doc x @ 965285 @ 1 @ 1
6 Control and Display Elements
Pos: 101 /BA/Maschine nbeschreibung/Easy Cut/Funktion der Sc halter Bedieneinheit: Einführtext @ 201\mod_1 385543209334_78.d ocx @ 1685688 @ @ 1
The control unit can be used to pre-select various functions of the machine. The actual
functions are performed by the control units.
The following table explains the function of the individual switches.
Pos: 102 /Abkürzungen / Abkürzungen sprachneu tral/EasyCut/Easy Cut B 870 CR/CV @ 232\mod_139 3498124507_0.docx @ 1851233 @ @ 1
EasyCut B 870 CV, EasyCut B 870 CR
Pos: 103 /BA/Maschine nbeschreibung/Easy Cut/Funktion der Sc halter Bedieneinheit: Bild neue Bedieneinheit oh ne Collect @ 201\mod_13 85543283427_78.doc x @ 1685747 @ @ 1
1
2
3
ECB00068
Fig. 4
Pos: 104 /BA/Maschine nbeschreibung/Easy Cut/Funktion der Sc halter Bedieneinheit: Tabelle B 870 ohne Collect neue B edieneinheit @ 225\mo d_1392632063294_78.doc x @ 1822918 @ @ 1
Switch Function
1)
Indicator lamp (red)
Lit when the control unit is switched on.
2) Momentary
toggle switch
centre: Control unit OFF
top:
Double-action control unit (blue 2+ / blue 2-):
(blue 2-):
– To lower both mowing units from transport position to
headland position.
(blue 2+):
– To raise both mowing units from headland position to
transport position.
bottom:
– The lower momentary toggle switch (3) is activated.
3)
Momentary toggle
switch
(only active if
momentary toggle
switch 2 is pointing
down)
centre:
Double-action control unit (red 1+/ rot 1-):
(red 1-)
– To lower both mowing units from headland position to
working position.
(red 1+)
– To raise both mowing units from working position to
headland position.
left:
Double-action control unit (blue 2+ / blue 2-):
(blue 2-):
– To lower the right mowing unit from headland position to
working position.
(blue 2+):
– To raise the right mowing unit from working position to
headland position.
Double-action control unit (red 1+/ rot 1-):
(red 1-)
– To lower the left mowing unit from headland position to
working position.
(red 1+)
– To raise the left mowing unit from working
position to headland position.