Krone EasyCut B 870 CV Collect - Wide Spreading

Settings
66
Pos: 119.41 /Übersc hriften/Überschr iften 3/A-E/B/Brei tablage @ 3\mod_120471376 4351_78.docx @ 72202 @ 3 @ 1
11.5.2 Wide spreading
Pos: 119.42 /Abkürzu ngen /CV-Ausführung @ 95\ mod_1328530180147_78. docx @ 799128 @ @ 1
CV-Design
Pos: 119.43 /BA/Einste llungen/Mähwer ke/Schwadbreite / Brei tablage/Hinweis Kreu zgriffe @ 59\mod_129743 1749350_78.doc x @ 558246 @ @ 1
Note
The star knobs may work loose due to vibrations, possibly resulting in the loss of the star
knobs, screws and swath plates.
• Manually tighten star knobs as tight as possible to ensure that they cannot work loose
during operation due to vibrations
Pos: 119.44 /BA/Einste llungen/Mähwer ke/Schwadbreite / Brei tablage/Einstellun g Breitablage Bild EC 280/ 320 CV-Q -1 @ 59\mod_1297432906 166_78.docx @ 558301 @ @ 1
EC-372-0
A
Fig. 32
Pos: 119.45 /BA/Sic herheit/7. Gefahrenhin weise alt/Sicher heitshinweise am Anfang de s Kapitels beachten @ 101\ mod_1330611811687_ 78.docx @ 897943 @ @ 1
• Observe the safety instructions at the beginning of the section.
Pos: 119.46 /BA/Einste llungen/Mähwerke/ Schwadbreite / Brei tablage/Einstellun g Breitablage Text EC 280/ 320 CV-Q -1 @ 59\mod_1297432972430 _78.docx @ 558328 @ @ 1
Swivel the swath flaps (2) all the way outwards (towards “A”).
Depending on the operating conditions, the deflector plates (3) may have to be adjusted to
obtain equal distribution across the entire area.
• Loosen star knob (1)
• Push the deflector plate (3) into the required position
• Tighten the star knobs (1)
Pos: 119.47 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1