Krone EasyCut B 870 CV Collect - Adjust Locking

Settings
70
Pos: 119.61 /Übersc hriften/Überschr iften 2/U-Z/Verriege lung einstellen @ 91\mod_1 326177560227_78.doc x @ 777175 @ 2 @ 1
11.6 Adjust Locking
Pos: 119.62 /BA/Einste llungen/Mähwer ke/EasyCut/Verriege lung einstellen Bi ld EC R 280/320 CV @ 91\mod_132617768 5810_78.docx @ 777203 @ @ 1
1
EC-363-0
EC-402-0
2
3
Fig. 35
Pos: 119.63 /BA/Sic herheit/7. Gefahrenhin weise alt/Sicher heitshinweise am Anfang de s Kapitels beachten @ 101\ mod_1330611811687_ 78.docx @ 897943 @ @ 1
• Observe the safety instructions at the beginning of the section.
Pos: 119.64 /BA/Einste llungen/Mähwerke/ EasyCut/Verriege lung einstellen Te xt EC R 280/320 CV / EC R 360 @ 91\mod_1326176346 008_78.docx @ 777147 @ @ 1
The locking (2) prevents during use that the side panel folds up and that foreign objects are
slung away. Therefore, it is very important to ensure before every use that the side panel (1) of
the machine is folded down and that the locking (2) is secured.
The side panel (2) must be adjusted in that way that
• the side panel (1) folds down when swivelling the machine from transport position to
working position and that it is secured by the locking (2)
• the side panel (1) slides independently from the locking when swivelling the machine from
working position to transport position and that the side panel is folded over to transport
position. Thus the transport height is reduced.
If this is not the case, the locking (2) must be set via the screw connection (3).
To do this:
• Loosen the screw connection (3)
• Readjust the locking in the oblong hole
• Tighten the screw connection (3)
Pos: 119.65 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1