Krone EasyCut B 870 CV Collect - Wide Spreading with the Cross Conveyor Option

Settings
68
Pos: 119.53 /Übersc hriften/Überschr iften 3/A-E/B/Brei tablage bei Option Querf örderband @ 11\mod_122345745 4069_78.docx @ 146943 @ 3 @ 1
11.5.4 Wide spreading with the "Cross Conveyor" option
Pos: 119.54 /Abkürzu ngen /Abkürzungen sprac hneutral/EasyCut/ EasyCut B 870 CR/CV Collec t @ 232\mod_13934981758 52_0.docx @ 1851262 @ @ 1
EasyCut B 870 CV Collect, EasyCut B 870 CR Collect
Pos: 119.55 /BA/Einste llungen/Mähwer ke/Schwadbreite / Brei tablage/Einstellun g Breitablage Bild EC B 1000 CV Co llect / B 870 CV/CR Collect @ 101\ mod_1330618689606_7 8.docx @ 898057 @ @ 1
Fig. 34
Pos: 119.56 /BA/Einste llungen/Mähwer ke/Schwadbreite / Brei tablage/Einstellun g Breitablage Text Easy Cut B 1000 CV Collect QFB @ 101\ mod_1330606533977_78. docx @ 897345 @ @ 1
Operation without the cross conveyor
• Move the machine to the working position.
• Switch off the PTO and then the tractor engine, secure the tractor against rolling and
remove the ignition key.
• Remove the deflector plates (2) from the brackets (1) and put to one side.
• Start the tractor and raise the cross conveyor over the terminal.
• Switch off the tractor engine and remove the ignition key.
• Close the stopcock (3) on the cross conveyor.
• Open the tedder flaps (4) as far as possible.
• Mount the deflector plates and tighten the palm grips (5).
• Open the stopcock on the cross conveyor.
Pos: 119.57 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1