EasyManua.ls Logo

Krone EasyCut B 870 CV Collect - Detaching the Machine

Krone EasyCut B 870 CV Collect
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
58
Pos: 117.44 /Übersc hriften/Überschr iften 2/A-E/Abbau der Maschine @ 3\mod_1204792387 824_78.docx @ 73245 @ 2 @ 1
10.6 Detaching the machine
Pos: 117.45 /BA/Sic herheit/EasyCut/Gef ahr - Maschine abstell en_mit Hydraulikschla uch @ 9\mod_1220883208423 _78.docx @ 128830 @ @ 1
Danger! - Unexpected movements of the machine
Effect: Danger to life, serious injuries
No one is permitted inside the danger zone.
Park the machine on a solid and even surface.
You should not unhitch the machine until the engine has been switched off and the ignition
key has been removed.
Secure the tractor against rolling.
Use extreme caution when attaching implements to or detaching them from the tractor! The
accident prevention regulations must be complied with absolutely.
When connecting the hydraulic hose to and disconnecting it from the hydraulic system of
the tractor, the tractor system as well as the machine system must be depressurised! Move
the appropriate control valves into the flow position.
When detaching the machine, do not walk between the tractor and the machine!
Pos: 117.46 /BA/Bedienu ng /EasyCut/Tripel/ Abkoppeln Bild EC B 870 @ 226\ mod_1392646163934_7 8.docx @ 1824765 @ @ 1
Fig. 24
Pos: 117.47 /BA/Bedienu ng /EasyCut/Tripel/ Abkoppeln EC B 1000/ B 870 Text @ 100\mod_133044285408 4_78.docx @ 894537 @ @ 1
Lower the front and rear parking supports (1) and secure them in position with bolts (2).
Lower the machine to the ground using the tractor's hydraulic system.
Remove the cardan shaft (3) from the tractor and place it onto the storage surface (4)
Disconnect the hydraulic hoses (5) from the tractor, fit the dust caps and hang them onto
the connection block.
Disconnect the connection of the lighting cable (6) between the tractor and machine and
place it in the supports provided for that purpose.
Disconnect the power supply plug (7) between the tractor and machine and place it in the
supports provided for that purpose.
Remove the terminal from the tractor and store it so that it is protected from damp.
Unhitch the top suspension arm.
Unlock the lower guide hook of the tractor.
Lower the rear power lift further until the lower guide bolts are free.
Drive the tractor away carefully.
Pos: 117.48 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/Grun dbild Hydauliksys tem/Seitenmähwerk e abkuppeln allgemein @ 93\ mod_1327400872032_7 8.docx @ 788479 @ @ 1
Before you disconnect the lateral mowing units from the tractor, depressurise the hydraulic
system completely so as to avoid difficulties when reconnecting the machine to the tractor the
next time.
Pos: 117.49 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1

Table of Contents

Related product manuals