Krone EasyCut B 870 CV Collect - Maintenance Table

Maintenance
76
Pos: 122.9 /Übersc hriften/Überschri ften 2/U-Z/Wartungstabe lle @ 65\mod_13003694 13064_78.docx @ 583966 @ 2 @ 1
12.3 Maintenance table
Pos: 122.10 /BA/W artung/Mähwerke/W artungstabelle - EasyCut mit Reibkupplung @ 193\mod_1 383233458804_78.doc x @ 1647358 @ @ 1
Maintenance work
Maintenance interval
Once after 10 hours Before the beginning of the season Every 10 hours but at least 1x daily Once after 50 hours Every 50 hours Every 200 hours
Cutter bar
Oil level check
X X
Oil change
not required
All gearboxes
Oil level check
X X
Oil change X
X
Checking the cutter blades
X X
Check the retaining bolts for cutter blades
X X
Check the material thickness of the leaf springs, with
blade quick-fit device design
X X
Cutting disc / blade drum X X
Linings on the cutter bar X
Tighten the screws / nuts
All screws
X X
Friction clutch
Vent
X
Guard cloths
Check the guard cloth for wear and damage
X
Pos: 122.11 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1