Krone EasyCut B 870 CV Collect - Page 34

Control and Display Elements
34
Pos: 105 /Abkürzungen / Abkürzungen sprachneu tral/EasyCut/Easy Cut B 870 CR/CV Collect @ 232\m od_1393498175852_0.doc x @ 1851262 @ @ 1
EasyCut B 870 CV Collect, EasyCut B 870 CR Collect
Pos: 106 /BA/Maschine nbeschreibung/Easy Cut/Funktion der Sc halter Bedieneinheit: Bild neue Bedieneinheit mit Collect @ 225\mod_1 392631043135_78.doc x @ 1822819 @ @ 1
1
ECB00088
2
3
4
Fig. 5
Pos: 107 /BA/Maschine nbeschreibung/Easy Cut/Funktion der Sc halter Bedieneinheit: Tabelle B 870 ohne Collect neue B edieneinheit @ 225\mo d_1392632063294_78.doc x @ 1822918 @ @ 1
Switch Function
1)
Indicator lamp (red)
Lit when the control unit is switched on.
2) Momentary
toggle switch
centre: Control unit OFF
top:
Double-action control unit (blue 2+ / blue 2-):
(blue 2-):
– To lower both mowing units from transport position to
headland position.
(blue 2+):
– To raise both mowing units from headland position to
transport position.
bottom:
– The lower momentary toggle switch (3) is activated.
3)
Momentary toggle
switch
(only active if
momentary toggle
switch 2 is pointing
down)
centre:
Double-action control unit (red 1+/ rot 1-):
(red 1-)
– To lower both mowing units from headland position to
working position.
(red 1+)
– To raise both mowing units from working position to
headland position.
left:
Double-action control unit (blue 2+ / blue 2-):
(blue 2-):
– To lower the right mowing unit from headland position to
working position.
(blue 2+):
– To raise the right mowing unit from working position to
headland position.
Double-action control unit (red 1+/ rot 1-):
(red 1-)
– To lower the left mowing unit from headland position to
working position.
(red 1+)
– To raise the left mowing unit from working
position to headland position.
Pos: 108 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1