16 ELECTRICAL SYSTEM
100
A00134-10
Main work
– Connect the battery charger to the 12-V battery. Switch on the
battery charger.
Battery charger (58429074000)
Info
Never remove cover
1
.
In addition, this battery charger can be used to test the
open-circuit voltage. It is also impossible to overcharge
the 12-V battery with this battery charger.
– Switch off the battery charger after charging. Disconnect the
12-V battery from the battery charger.
Guideline
The charging current, charging voltage or charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
3 months
Finishing work
– Install the 12-V battery. ( p. 98)
– Lock the seat. ( p. 69)
16.4 Changing the fuses of individual power consumers
Info
The fuse box containing the fuses for the individual power consumers is located under the seat, behind
the 12-V battery.
Preparatory work
– Deactivate the vehicle. ( p. 43)
– Fold the seat up. ( p. 69)
– Remove the KTM PowerPack. ( p. 107)
– Mount the protection cap. ( p. 71)
F01685-10
Main work
–
Detach catches
1
and open the fuse box cover.
To Next Page
Loading...
