22 STORAGE
126
22.1 Storage
Info
If the motorcycle is not being used for an extended length of time, additional measures are recommended.
Have service work, repairs or conversions performed outside the motorcycling season, if possible. This
allows you to avoid long waiting periods when the next season starts.
401058-01
– Discharge the KTM PowerPack to a charging level of 50%.
– Check all motorcycle parts for function and wear.
– Remove the KTM PowerPack. ( p. 107)
– Mount the protection cap. ( p. 71)
– Remove the 12 V battery. ( p. 98)
– Charge the KTM PowerPack in the Storagecharging mode.
( p. 113)
Guideline
The maximum period of inactivity of the KTM PowerPack is
1 year.
Ideal storage temperature of
the KTM PowerPack without
direct sunlight
10 … 20 °C (50 … 68 °F)
Info
Never store the KTM PowerPack at higher temperatures
as this would greatly accelerate the aging process.
– Charge the 12 V battery. ( p. 99)
Guideline
Storage temperature of the
12-V battery away from
direct sunlight
0 … 35 °C (32 … 95 °F)
– Clean the motorcycle. ( p. 124)
– Check the antifreeze and coolant level. ( p. 117)
– Check tire pressure. ( p. 95)
– Store the vehicle in a dry location that is not subject to large
fluctuations in temperature.
Info
If the vehicle is placed on a lift stand, the tires and
spring elements will be relieved of weight.
– Raise the motorcycle with a lift stand. ( p. 57)
– Cover the vehicle with a tarp or similar cover that is permeable
to air.
Info
Do not use any non-porous materials, as moisture can-
not escape and corrosion can occur.
To Next Page
Loading...
