KTM Freeride E-XC 2019 - Installing the Headlight Mask with the Headlight

16 ELECTRICAL SYSTEM
102
A00196-10
Main work
–
Detach the brake line and wiring harness
1
.
–
Loosen rubber straps
2
. Slide the headlight mask up and
swing it forward.
E00968-11
–
Disconnect plug-in connector
3
of the turn signal relay, plug-
in connectors
4
of the turn signals, plug-in connector
5
of
the headlight and plug-in connector
6
of the ignition lock.
16.6 Installing the headlight mask with the headlight
E00968-10
Main work
–
Join plug-in connector
1
of the turn signal relay, plug-in con-
nectors
2
of the turn signals, plug-in connector
3
of the
headlight and plug-in connector
4
of the ignition lock.